Solar Panel, Charge Controller,
Solar Battery, Inverter, DIY Kit, Wind Turbine,
ph: +603-8052-0078 (Sales)
fax: +603-2178-4468
sales
Solar Power Mart offers several specialty wiring components to help complete your system. Battery Interconnects and Battery to Invertor cables will be necessary for any system with batteries. We also offer crimping Cable & Wire Tools if you would like to make your own battery cables. In addition to wiring between solar modules, between batteries, and between the battery bank and inverter, you will also need wiring from the combiner box to the battery bank - sometimes known as the home-run.
RM10.00 per cable US$4.00 per meter
Our battery cable is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing.
Our proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 750 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion.
Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards.
All of our Battery interconnect cables are fitted with terminal lugs. Make sure to check your battery posts to ensure they can accept this type of connection.
To select the proper length of cable, put the battery bank in place and measure the distance between the battery terminals you need to connect.
Choose a length that is slightly longer than the measured value.
Avoid selecting an interconnect cable that is too long, since this may cause you to bend the cable significantly in order to get in in place.
Tight bends can cause wear or cracks in the insulation or damage the conductors and should be avoided. If necessary to bend the cable, use only slight bends.
Our high quality battery interconnect cables are the best value available featuring xtra-flex, multi-stranded copper cable - rated 105°C degrees, 750 volt, (UL) type MTW/THW, CSA -TEW. All cables are assembled with large, tin-plated copper lugs, double crimped and heat sealed with color coded melt wall tubing, ensuring long life.
Due to porpular demands on our battrey cable, we now sell the battery cable by 100 meter.
Crimps 20-10 AWG (.05-.6 mm2)open barrel contact pins.
Crimps: 20-10 AWG (.05-.6 mm2) stranded wire
Copyright 2007 SC Origin. All rights reserved. Solar Power Mart is a division of SC Origin. Solar Power Mart is a trademark of SC Origin.
Kuala Lumpur Singapore Hongkong Shenzhen Sydney London New Delhi Tokyo Berlin Paris Rome Madrid
Solar Panel, Charge Controller,
Solar Battery, Inverter, DIY Kit, Wind Turbine,
ph: +603-8052-0078 (Sales)
fax: +603-2178-4468
sales