Since 2007                                            Harvest the Sunpower!

PRODUCT OVERVIEW: battery desulfator, battery regenerator, battery rejuverator
Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator/Recovery unit uses no external power and generates a high-frequency pulse to dissolve batteries
“sulfates”.

FUNCTION
The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.

ADVANCED TECHNOLOGY
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery.  This old technology creates a harsh inductor peak that can be damaging to the battery plates. Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.
 
Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.

NEW CYCLIC PULSING FUNCTION
In a similar manner to a Pulse battery charger (charge – rest –charge –rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator

AUTO PULSE DESULFATOR BENEFITS:
Increases Battery Power
Extends Battery Life
Battery Charge Faster
Longer Discharge
Prevents Sulfate Build-up
Reduces Evaporation
 
COMPETITIVE ADVANTAGES
Fully Automatic voltage selection. 12V 24V 36V and 48V
New Cyclic pulse generation method for improved capacity recovery
“Soft” Peak Pulsing
Auto cutoff function to prevent over discharge of battery
User Configurable override for manual voltage selection:

USAGE METHOD
Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse
Battery Desulfator can cutoff when battery’s voltage is low.

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage.
In this instance it is possible to manually set the desired operating voltage. By pressing the voltage
select button. The LED screen will first display the working voltage and if you want to then alter the
working voltage setting just presses the key again and the unit will change to next value. After setting
the desired voltage the display will switch off to conserve battery power.
 
CUTOFF VOLTAGE
                       Display   Cut off voltage
12V Battery      C12        11.0V
24V Battery      C24        22.0V
36V Battery      C36        33.0V
48V Battery      C48        44.0V
 
 
SPECIFICATION:
Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ
LED light indicates when pulse working
Cutoff amp: <5mA
Size: 88*56*23mm
Weight: 150g, including inner package
 
Remarks: this battery desulfator is suitable for battery capacity below and around 200AH.
Our battery desulfator can only revive batteries which are not internally damaged, so if pls make sure your battery is not internally damaged before reviving!

Optimize your battery life span for up to 3 times!

Sulfation, or lead acid crystal buildup on your battery plates is by far the most common cause of battery failure, accounting for 84% of batteries according to the Battery Council International.  We therefore junk our batteries long before the end of their designed lifespan.

The Infinitum Desulfator Battery Life Optimizer prevents sulfation on your battery and reverses the existing lead sulfate crystals on the plates, ensuring a battery with maximum lifespan and optimum performance.  This desulfation process can double or triple your battery life

Why you need desulfators and how you will benefit

84% batteries fail prematurely
This is due to lead sulfate crystal buildup on the plates.  This means that most people throw away batteries before they have to!

Batteries lose life span even before use!
New batteries suffer from lead sulfate crystallization before you even buy them.

Double or triple the service life of batteries
Our Desulfators generates an electrical pulse that shatters and removes lead sulfate crystals maximizing its life-span and performance.

Revives 'dead' or junked batteries
Revives dead batteries when used in parallel with a charger.

Save your hard earned money
Lower the frequency of battery change.  Payback within one battery change.

Save the earth
Reducing the rate of battery disposal means less disposal of hazardous lead and sulfuric acid.

Optimize efficiency & storage capacity
Prevents lead sulfate crystallization in new batteries.  Prevents damage to lead plates due to lead sulfate crystal buildup.

Lowers battery operating temprature
The degree of battery discharge increases with temperature whether in use or storage.  With a lower operating temperature, less evaporation occurs.